ADE7768ARZ-RL【PDF 1/20 页】IC ENERGY METERING 1PHASE 16SOIC

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录307

[1页]2页 3页 4页 5页

Energy Metering IC with Integrated

Oscillator and Positive Power Accumulation

ADE7768

U.S. Patents 5,745,323; 5,760,617; 5,862,069; 5,872,469; others pending.

FEATURES

On-chip oscillator as clock source

High accuracy, supports 50 Hz/60 Hz IEC62053-21

Less than 0.1% error over a dynamic range of 500 to 1

Supplies positive-only average real power on frequency

outputs F1 and F2

High frequency output CF calibrates and supplies

instantaneous, positive-only real power

Logic output REVP indicates potential miswiring or negative

power

Direct drive for electromechanical counters and 2-phase

stepper motors (F1 and F2)

Proprietary ADCs and DSPs provide high accuracy over

large variations in environmental conditions and time

On-chip power supply monitoring

On-chip creep protection (no-load threshold)

On-chip reference 2.45 V (20 ppm/°C typical) with

external overdrive capability

Single 5 V supply, low power (20 mW typical)

Low cost CMOS process

GENERAL DESCRIPTION

The ADE7768 1 is a high accuracy, electrical energy metering IC.

It is a pin reduction version of the ADE7755, enhanced with a

precise oscillator circuit that serves as a clock source to the chip.

The ADE7768 eliminates the cost of an external crystal or

resonator, thus reducing the overall cost of a meter built with

this IC. The chip directly interfaces with the shunt resistor.

The ADE7768 specifications surpass the accuracy require-

ments of the IEC62053-21 standard. The AN-679 Application

Note can be used as a basis for a description of an IEC61036

(equivalent to IEC62053-21) low cost, watt-hour meter

reference design.

The only analog circuitry used in the ADE7768 is in the Σ-Δ

ADCs and reference circuit. All other signal processing, such as

multiplication and filtering, is carried out in the digital domain.

This approach provides superior stability and accuracy over

time and extreme environmental conditions.

The ADE7768 supplies positive-only average real power

information on the low frequency outputs, F1 and F2. These

outputs can be used to directly drive an electromechanical

counter or interface with an MCU. The high frequency CF logic

output, ideal for calibration purposes, provides instantaneous

positive-only, real power information.

The ADE7768 includes a power supply monitoring circuit on

the V DD supply pin. The ADE7768 remains inactive until the

supply voltage on V DD reaches approximately 4 V. If the supply

falls below 4 V, the ADE7768 also remains inactive and the F1,

F2, and CF outputs are in their nonactive modes.

Internal phase matching circuitry ensures that the voltage and

current channels are phase matched, while the HPF in the

current channel eliminates dc offsets. An internal no-load

threshold ensures that the ADE7768 does not exhibit creep

when no load is present. When REVP is logic high, the

ADE7768 does not generate any pulse on F1, F2, and CF.

The ADE7768 comes in a 16-lead, narrow body SOIC package.

FUNCTIONAL BLOCK DIAGRAM

V DD

AGND

DGND

ADE7768

POWER

SUPPLY MONITOR

SIGNAL

PROCESSING

V2P 2

V2N 3

Σ - Δ

ADC

...110101...

MULTIPLIER

BLOCK

PHASE

CORRECTION

LPF

V1N 4

V1P 5

2.5V

Σ - Δ

ADC

4k Ω

...11011001...

INTERNAL

OSCILLATOR

HPF

DIGITAL-TO-FREQUENCY

CONVERTER

REFERENCE

REF IN/OUT

RCLKIN

SCF

S1 REVP CF

Figure 1.

Rev. A

Information furnished by Analog Devices is believed to be accurate and reliable.

However, no responsibility is assumed by Analog Devices for its use, nor for any

infringements of patents or other rights of third parties that may result from its use.

Specifications subject to change without notice. No license is granted by implication

or otherwise under any patent or patent rights of Analog Devices. Trademarks and

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700 www.analog.com

registered trademarks are the property of their respective owners.

Fax: 781.461.3113

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式